Submitted contributions for the SSCHE 2019 conference
Sort by: Title,
Session,
Author
Engineering and economy in biotechnologyEnvironmental engineering
Industrial process design and control
Momentum, heat and mass transfer
Reaction engineering and catalysis
Risk management and process safety
Separation processes
WAS&BIO - Waste and biomass as sustainable energy and material sources
1. Engineering and economy in biotechnology
Lectures
Posters
2. Environmental engineering
Lectures
1 |
Acid separation from side streams in biorefinery Painer, Daniela; Lux, Susanne; Siebenhofer, Matthaeus |
2 |
Applicability of Biochar from Waste Wooden Biomass for Treatmet of Wastewater Containing Atibiotics Žgajnar Gotvajn, Andreja; Carvalho, Ana Paula; Marinšek, Marjan; Kalčikova, Gabriela |
3 |
Chemometric techniques applied in fast profiling of plants in abiotic stress Mot, Augustin; Zagrean-Tuza, Cezara; Sarbu, Costel |
4 |
Elimination of micropollutants from effluents of WWTPs Szabová, Petra; Plekancová, Michaela ; Bodík, Igor; Vojs Staňová , Andrea; Grabic, Roman |
5 |
IMPACT OF HYDRODYNAMIC CAVITATION ON BY-PRODUCTS FORMATION IN POST-CHLORINATED DRINKING WATER Čehovin, Matej; Žgajnar Gotvajn, Andreja |
6 |
Microbial degradation of BTEX compounds in groundwater after ozonation process Šimkovič, Karol; Derco, Ján; Griebler, Christian |
7 |
Plastic waste treatment by triboelectric separation Kolářová, Lenka; Konopka, Ladislav; Jantač, Simon; Kosek, Juraj |
8 |
Redox Flow Batteries for Stationary Energy Storage Vrána, Jiří; Dundálek, Jan; Charvát, Jiří; Mrlík, Jindřich; Pocedič, Jaromír; Mazúr, Petr; Kosek, Juraj |
9 |
Use of ozonation and adsorptive ozonation for the industrial wastewater treatment Urminská, Barbora; Derco, Ján; Bony, Sylvie; Devaux, Alain; Šimkovič, Karol; Čižmárová, Oľga |
Posters
1 |
BMP tests of lipids produced in industrial WWTP Hencelová, Kristína; Jankejech, Peter; Chávez Fuentes, Juan José; Gróf, Nikolas; Barbušová, Jana ; Hutňan, Miroslav |
2 |
CARNIVOROUS CONSERVATION MEASURES FROM SOMESUL RECE NATURA 2000 SITE Proorocu, Marian; Avram, Cristina; TUPITA, Maria |
3 |
Cultivation Strategies for Photobionts isolated from lichens Matejčíková, Anna; Loureiro, Luís ; Polakovič, Milan; Vicente, António |
4 |
Improvement of sludge management of municipal WWTP Gróf, Nikolas; Hutňan, Miroslav; Barbušová, Jana ; Hencelová, Kristína; Prušanská, Milena |
5 |
Processing of old flotation tailings of copper-zinc sulfide ore Bulaev, Aleksandr; Melamud, Vitaliy; Valiev, Khusain; Bugubayeva, Aliya; Amandikova, Aigul |
6 |
Removal of pesticide lindane by means of oxidation processes Čižmárová, Oľga; Tonhajzerová, Martina; Derco, Ján; Urminská, Barbora |
7 |
Safe and efficient stabilization of nanofluids Wciślik, Sylwia |
8 |
Selection of microorganisms using n-butanol and cyclohexane as a source of carbon for biofiltration process Gospodarek, Milena; Brillowska-Dąbrowska, Anna; Rybarczyk, Piotr; Gębicki, Jacek |
9 |
Simultaneous removal of n-butanol and cyklohexane from air in a biotrickling filter Rybarczyk, Piotr; Gospodarek, Milena; Szulczynski, Bartosz; Gębicki, Jacek |
10 |
Study of dehalogenation of Diclofenac using Raney Al-Ni alloy in aqueous alkaline medium Bendová, Helena ; Weidlich, Tomáš |
11 |
Synthesis and characterization of magnetic nanomaterials with adsorptive properties Lendzion-Bieluń, Zofia; Wojciechowska, Agnieszka |
12 |
The potential of waste fungal biomass for metal adsorption from aqueous solution Rozman, Ula; Žgajnar Gotvajn, Andreja; Marolt, Gregor; Gregori, Andrej; Kalčikova, Gabriela |
3. Industrial process design and control
Lectures
1 |
Application of D.O.E. to model LC Fining Conversion Krázel, Viktor; Kalaš, Daniel; Frátrik, Radoslav; Vdovjak, Ladislav |
2 |
Application of non-standard methods during pharmaceutical development for linking disintegration mechanism to dissolution behaviour Tomas, Jan; Dvořák, Jakub; Dammer, Ondřej; Schöngut, Marek; Beránek, Josef; Štěpánek, František |
3 |
Design, Control and Economics of Processes for 2-Ethylhexyl Acrylate Production Moraru, Mihai Daniel; Zaharia, Elena; Bildea, Costin Sorin |
4 |
Predicting performance of oral dosage forms through mathematical modelling Boleslavská, Tereza; Štěpánek, František; Beránek, Josef |
5 |
Techno-economic study on the fuel gas replacement by the water steam in the aromatics-rich stream splitting process Variny, Miroslav; Jediná, Dominika; Illés, Peter; Mierka, Otto; Dudáš, Jozef |
Posters
1 |
Crude selection in Slovnaft by using simulation software Kudláčová, Gabriela; Polakovičová, Marta; Brunnerová, Eva |
2 |
Design of an Optimal Solution for Water Cooling of Polymerization Reactors on PP3 Operation Unit Véghová, Lenka; Variny, Miroslav; Margetíny, Tibor |
3 |
Evaluation of the existing C4 fractionation process retrofit possibility by the incorporation of a heat pump Variny, Miroslav; Švistun, Ladislav; Mierka, Otto; Kováč, Norbert |
4 |
Experimental study of the effect of polymeric drag reducing additive on turbulent flow in a vertical pipe Puškášová, Eva; Dzianik, František; Gužela, Štefan |
5 |
Optimisation of heavy residue hydrocracking based on temperature control system upgrade Bartoš, Matej; Janošovský, Ján; Labovský, Juraj |
6 |
Simulation based monitoring at Slovnaft Refinery Lőrincz, Réka |
4. Momentum, heat and mass transfer
Lectures
1 |
Characterization of nanostructured materials in electrochemical microfluidic systems Kralik, Dominik; Halada, Štěpán; Slouka, Zdenek |
2 |
Effect of temperature on the size and structure of fractal aggregates formed by polymer nanoparticles Wilson, Jose Francisco; Šoóš, Miroslav |
3 |
Preparation of microcellular polymeric foams with controlled morphology Bouřa, Patrik; Nistor, Andra; Minichová, Mária; Zubov, Alexandr; Kosek, Juraj |
4 |
Towards understanding of triboelectric charging of polymer powder Jantač, Simon; Kučerová, Jarmila; Konopka, Ladislav; Kosek, Juraj |
5 |
Volumetric mass transfer coefficient in coalescent batch in mechanically agitated fermenters. Petříček, Radim; Kracík, Tomáš; Moucha, Tomas |
Posters
1 |
Heat transfer investigations in a liquid that is mixed by means of a multi-ribbon mixer Borowski, Tomasz; Sołoducha , Dawid ; Konopacki , Maciej; Kordas, Marian; Rakoczy, Rafał |
2 |
Lactic acid separation by the liquid membrane at high pH. Kracík, Tomáš; Moucha, Tomas |
3 |
Multi-scale modelling of gasoline particulate filters employing 3D X-ray tomography Placha, Marie; Pečinka, Rudolf; Václavík, Marek; Isoz, Martin; Leskovjan, Martin; Kočí, Petr; Price, Emily; Thompsett, David |
4 |
Prediction of power consumption in mechanically agitated gas-liquid reactors in non-coalescent batch Kracík, Tomáš; Moucha, Tomas; Petříček, Radim |
5 |
Preparation and characterization of biopolymeric microcellular foams Bouřa, Patrik; Nistor, Andra; Zubov, Alexandr; Kosek, Juraj |
6 |
Volumetric mass transfer coefficient in the gas-liquid contactor agitated by Rushton turbines of various diameters in non-coalescent batch Kracík, Tomáš; Moucha, Tomas; Petříček, Radim |
5. Reaction engineering and catalysis
Lectures
Posters
6. Risk management and process safety
Lectures
1 |
Novel methodology of combined process hazard and energy efficiency analysis in chemical industry Janošovský, Ján; Danko, Matej; Labovská, Zuzana; Labovský, Juraj; Jelemenský, Ľudovít |
2 |
Risk assessment matrix Absolute vs. Relative approach Krško, Martin |
Posters
1 |
Antioxidant capacity of fortified rapeseed oil with phenolipids during storage in different conditions Rabiej, Dobrochna; Szydłowska-Czerniak, Aleksandra |
2 |
Comparative exposure analysis for multiple HAZMAT transports on Valea Oltului Area, Romania. Radovici, Andrei; Torok, Zoltan ; Ozunu, Alexandru |
3 |
Co-operation of the Fire Rescue Service with specialists for the prevention of Major Industrial Accidents (MIA) Lalík, Tomáš |
4 |
GPU accelerated chemical engineering applications Danko, Matej; Labovský, Juraj; Jelemenský, Ľudovít |
5 |
Relevance of mathematical model selection for process hazards identification Kačmárová, Adriána; Janošovský, Ján; Labovská, Zuzana; Labovský, Juraj; Jelemenský, Ľudovít |